OPINION AND ORDER 1
This case concerns two patents, United States Patent No. 4,905,973 (“the ’973 patent”) and United States Patent No. 5,575,-462 (“the ’462 patent”), issued to John Blatt and currently assigned to Plaintiff Norgren Automotive, Inc. (“Norgren”). Both patents involve rotary power clamps. Norgren contends that the Defendant, SMC Corporation of America (“SMC”), sells a clamp that infringes both the ’973 and ’462 patents.
After receiving initial claim construction briefs, the Court held a Markman hearing on September 11, 2002 and took the matter under advisement. The parties submitted post-hearing claim construction briefs on November 1, 2002, and subsequently, both parties submitted responses.2 The case is now before the Court to interpret the claim language as a matter of law.
I. BACKGROUND
The following is taken from the Plaintiffs initial claim construction brief:
*912Rotary power clamps are well known within the automotive and manufacturing industries. Such rotary power clamps typically translate linear actuator reciprocating movement into angular rotary movement of a clamp arm for clamping a workpiece to a workpiece-holding fixture. The linear actuator movement is provided by a linear actuator powered by a fluid motor, such as a pneumatic cylinder. The linear actuator drives a piston rod which is pivotally connected to a linkage assembly. The linkage assembly is also connected to the clamp arm wherein the linkage assembly converts the linear reciprocating movement of the piston rod into rotary motion of the clamp arm. Normally, when the fluid motor retracts the piston rod to a retracted position, the clamp arm is in a released position, that is, the clamp arm is removed from the workpiece and the workpiece-supporting fixture. When the fluid motor actuates the piston rod into the extended position, the clamping arm is pivotally moved into a clamping position to clamp the workpiece and hold and/or locate the workpiece against the work-supporting surface.
Various guide and linkage mechanisms have been proposed to correctly translate the linear reciprocating movement of the piston rod to correct the swinging movement of the clamp arm into or out of a clamping position, seeking to obtain the highest mechanical advantage which can be utilized within the power stroke of the fluid cylinder. John A. Blatt recognized and developed many unique and novel power clamp designs that led to significant advantages, both functionally and commercially. Some of these designs are protected by [patents ’462 and ’973], both currently assigned to Norgren Automotive, Inc.
The claims of the ’973 and ’462 patents call for several elements; however, the focus of each respective patent is different. In the ’973 patent, it is an internal stop which positions the clamp arm in a predetermined location upon reaching the clamped position. The stop is connected to or is essentially integral with the clamp arm so that any “slop” created by wear in the linkage assembly will not affect the position of the clamp arm in the clamped position. In addition, the interior location of the stop prevents any foreign matter from affecting the function of the stop.
The ’462 patent focuses on a reset button located in the end of the power clamp. When the power clamp is in the clamped position, the actuation forces are often so great that when power is lost to the power clamp in the clamped position, the clamp arm cannot be manually moved from the clamp position. Such movement is often desired to release a workpiece from the clamped position. In order to release the clamp arm from the clamped position upon loss of power, the ’462 patent provides a reset button which when hit, drives the linkage assembly toward the unclamped position. Once the linkage assembly has been moved from the clamped position, the actuation forces are greatly reduced, and the clamp arm can be manually moved toward the unclamped position.
(P’s Brief at 2-4).
II. STANDARD OF REVIEW
Title 35 U.S.C. § 271(a) states: “whoever without authority makes, uses, sells, or offers to sell any patented invention, within the United States or imports into the United States any patented invention ..., infringes the patent,”
Adjudication of a patent infringement action requires a two-step analysis. *913First, the Court must interpret the claim in what is known as a Markman hearing.3 Claim interpretation is an issue of law reserved for the Court. Id. at 979; see also Fromson v. Anitec Printing Plates, Inc., 132 F.3d 1437, 1441-42 (Fed.Cir. 1997), cert. denied, 525 U.S. 817, 119 S.Ct. 56, 142 L.Ed.2d 43 (1998). Once the claim has been interpreted, the second step is an infringement analysis, or determining whether the claims as interpreted encompass the accused device. Mannesmann Demag Corp. v. Engineered Metal Products, 793 F.2d 1279, 1282 (Fed.Cir.1986). Infringement is an issue of fact, which in this case has been reserved for a jury.
At a Markman hearing, the Court must examine and resolve disputes over the meaning and scope of technical words or terms of art used in the patent. To interpret the disputed claims, the Court must look first to the patent’s intrinsic evidence, which consists of the claims themselves,4 the specification,5 and the prosecution history.6 Markman, 52 F.3d at 979; Minnesota Mining and Mfg. Co. v. Johnson & Johnson Orthopaedics, Inc., 976 F.2d 1559, 1566 (Fed.Cir.1992). If the claim’s meaning is clear from the intrinsic evidence, it is improper for the Court to look beyond the intrinsic evidence to other sources. Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed.Cir.1996).7 However, extrinsic evidence, such as general or technical dictionaries, expert testimony, inventor testimony, technical treatises, and articles, may be employed to assist the Court in understanding unfamiliar technology. Id. at 1584-85; Mark-man, 52 F.3d at 981. Extrinsic evidence, though, must not be used for the purpose of varying or contradicting the terms of the claims. - Vitronics, 90 F.3d at 1584.
*914III. ANALYSIS
As noted above, there are two patents at issue, the ’973 and the ’462 patents. The parties have narrowed the areas of contention substantially, leaving only a handful of terms to interpret, including “lever arm,” “internal,” “stop,” and “resetting means.” Each patent will be addressed separately below.
A. ’973 Patent
Plaintiff alleges the Defendant infringed Claims 1, 3, 4, 6, and 8-14 of the ’973 patent. In particular, the Plaintiff has asked the Court to interpret “lever arm,” “internal,” and “stop.” • The Defendant lumps all those terms together and asks the Court to interpret the phrase “stop on the lever arm engageable with the housing.”
Taking the easiest argument first, the Court agrees with the Plaintiff that there is no need for the Court to define the term “stop.”8 Neither side disputes that, under the plain language of the patent — “a stop formed on said lever arm” — the stop must be on the lever arm. Also, neither side disagrees that the stop must be “engagea-ble with said enclosure.”9 Rather, the dispute is over whether the SMC clamp’s stop is formed on the lever arm and whether the stop engages with the enclosure, which are patent infringement questions for the jury.
The first real point of contention, then, is what constitutes the lever arm. The Plaintiff proposes that the lever arm should be interpreted as “an elongated element having a pivoting end, a moment arm, and an actuating end.” The Defendant proposes adding that the lever arm should be “disposed between the link and the pin portion of the pivot pin.” In practical terms, the Plaintiff believes that the lever arm, referred to as 62 in the drawings, includes the area surrounding the pin (74). The Defendant argues that the lever arm ends at the pin.10
The Court again agrees with the Plaintiffs position because the Defendant’s po*915sition is simply untenable. Defendant’s argument that the lever arm stops at the pivot pin, rather than extending around the pivot pin, fails for two reasons. First, without extending around the pivot pin, the lever would not actually provide leverage, which is an illogical result. Second, there is nothing in the claims themselves, the specification, or the prosecution history to support Defendant’s interpretation. The specification, for example, recites that “[a] pin 74 engages through aperture 72 in the lever arm 62.” The use of the word “through” demonstrates that the lever arm extends beyond the pivot pin. Therefore, the Court construes the lever arm as being “an elongated element having a pivoting end, a moment arm, and an actuating end.” ’973 patent, Col. 3, Lns. 50-51. However, as urged by the Defendant, the Court notes that the patent specifies that the lever arm must extend internally within the enclosure, while the pivot pin is the structure that extends externally from the housing. See, e.g., ’973 patent, Col. 4, Lns. 58-60 (“[the] pivot pin having an end extending externally from said housing and a lever arm extending internally within said housing.”). Thus, the Court expresses no opinion on whether SMC’s stop is formed on the lever arm, as defined, because that is an infringement question reserved for the jury.
The final point of disagreement is construction of the term “internal.” The dispute is central because SMC argues that its stop is external, while Plaintiff argues that since SMC’s “external” stop is covered by a plate, it is actually internal. Defendant argues that “internal” should be limited to the hollow between the two bifurcated halves of the housing. Plaintiff, on the other hand, asserts that “internal” should be given its ordinary meaning, and the term should be construed as “[i]n some way encased by the enclosure to protect from the environment the surrounding enclosure.”
“[A]s a general rule, all terms in a patent claim are to be given their plain, ordinary and accustomed meaning to one of ordinary skill in the relevant art.” Rexnord v. Laitram Corp., 274 F.3d 1336, 1342 (Fed.Cir.2001). However, it is also the case that “a patentee may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.” Vitronics, 90 F.3d at 1582. The patentee did not choose to do so here because there is nothing in the claims, prosecution history, or specification that defines “internal” in a special way or adds anything to the common understanding of the word. Thus, the Court finds that “internal” has its ordinary meaning to one skilled in the art.
The Court notes that the above ruling does not resolve what the parties really want to know — whether SMC’s stop is internal or external. Defendant places great emphasis upon the phrase used in the specification that states “a bifurcated housing attached to the cylinder provides a closed enclosure...Col. 2, Lns. 10-13, and that the lever arm “extend[s] internally within said housing,” concluding that demonstrates that only the hollow area between the two halves can be internal. While such a reading of the phrases is possible, neither phrase compels a conclusion that Defendant’s interpretation is correct. In fact, neither phrase sheds much light at all on whether a structure (such as a stop) located in the housing’s wall is internal or external. Similarly, the Plaintiffs proposal, that “internal” is anything that protects the mechanisms from the environment, is also plausible, but it does not have specific support the intrinsic evidence either. Consequently, the Court declines to decide whether the SMC’s stop is internal or external. Whether the SMC stop fits within the ordinary meaning of *916the word internal is a question of fact for the jury. In addition, for the Court to decide the issue would require reference to the accused device, which is not permitted. SRI Int’l v. Matsushita Electric Corp., 775 F.2d 1107, 1118 (Fed.Cir.1985) (“It is only after the claims have been construed without reference to the accused device that the claims, as so construed, are applied to the accused device to determine infringement.”) (emphasis in original). Therefore, it will be up to a jury to determine whether SMC’s removable plate creates an internal or external stop.
B. ’462 Patent
Plaintiff alleges that the Defendant has infringed Claims 1-4 and 7 of the ’462 patent. However, the parties have sought the Court’s interpretation on only one phrase of the ’462 patent — “resetting means.”11
The parties agree that the “resetting means” is expressed in means-plus-function language and is, therefore, subject to 35 U.S.C. § 112, ¶ 6.12 The statute allows claims that recite a function to be performed rather than specifically defining the structure or materials for performing the function. Applying § 112, ¶ 6, then, “requires both identification of the claimed function and identification of the structure in the written description necessary to perform that function.” Micro Chemical, Inc. v. Great Plains Chemical Co., Inc. 194 F.3d 1250,1258 (Fed.Cir.1999).
The parties agree that the function of the “resetting means” is to disengage the clamp after it has. been in the locked position. With the function identified, the Court turns to the area of disagreement — definition of the corresponding structure. Micro Chemical, 194 F.3d at 1258 (“After identifying the function of the means-plus-function element, this court looks to the written description to identify the structure corresponding to that function.”). To resolve the dispute, the Court examines the description in the specification and any “equivalents thereof.” 35 U.S.C. § 112; Ghiuminatta Concrete Concepts, Inc., v. Cardinal Industries, Inc., 145 F.3d 1303, 1308 (Fed.Cir.1998).
Defendant SMC proposes the following interpretation of the structure for the resetting means:
[A] reciprocal member may utilize any geometry which allows the reciprocal member to be slidably disposed within the wall of the housing while engaging the linkage mechanism internally and providing access to the reciprocal member externally.
(D’s Exh. 99, slide 21D). Plaintiff Nor-gren, on the other hand, proposes the following interpretation:
*917“Any means or member of any geometry, separate from the linear actuator, which may move the converting means by presenting an accessible contact surface outside the housing.”
(P’s Supp. Brief at 10).
The Defendant states that its interpretation is compelled by the specification’s language, which states:
It should be noted that the present invention is not limited to a reciprocal number 80 having a cylindrical body 86 and ends 88, 90, but rather, the reciprocal member may utilize any geometry which allows the reciprocal member 80 to be slidably disposed within the wall 8U of the housing 2k while engaged the linkage mechanism internally and providing access to the reciprocal member 80 externally.
’462 patent, Col. 7, Lns. 42-49 (emphasis added).
The Defendant argues that the patentee is free to define any equivalents he or she desires, and the patentee took advantage of that rule here. Thus, the Defendant argues that each of the three limitations mentioned in the specification, containing the patentee’s own definition of equivalents, should be included in the structural definition: (1) slidably disposed within the wall, (2) engaging the linkage mechanism internally, and (3) providing access to the resetting means externally. Defendant asserts that Plaintiffs version omits requirements 1 and 2.
Before going any further, despite Defendant’s argument to the contrary, the Court notes that the Plaintiff does not seem to object to Defendant’s second limitation, engaging the linkage mechanism internally, leaving only the dispute over “slidably disposed.” 13
As for the merits of Defendant’s argument, the Plaintiff responds, first, that § 112, ¶ 6 does not permit incorporation of structure from the specification beyond what is necessary to perform the claimed function, citing Micro Chemical, 194 F.3d at 1258 (“[t]he statute [does not] permit incorporation of structure from the written description beyond that necessary to perform the claimed function.”). Thus, under the Micro Chemical case, the Plaintiff argues that since “slidably disposed” is not required to perform the function of “resetting said converting means towards said first position,” it cannot be read into the claim.
In reply, the Defendant asserts that means-plus-function claims, unlike other claims, are required to be read in light of the specification. In support, the Defendant cites Kahn v. General Motors Corp., 135 F.3d 1472, 1476 (Fed.Cir.1998), which states:
Unlike the ordinary situation in which claims may not be limited by functions or elements disclosed in the specification, but not included in the claims themselves, in writing a claim in means-plus-function form, a party is limited to the corresponding structure disclosed in the specification and its equivalents.
At the outset, the Court recognizes that the language in Micro Chemical suggests Plaintiff is right, while the language from *918 Kahn cited by Defendant is equally persuasive. Defendant initially argued that Plaintiffs position was mistaken because this is a means-plus-function claim, where the Court is expressly supposed told to examine the specification for the corresponding structure. However, even in a means-plus-function context, the Micro Chemical court cautioned against allowing the specification to conflict with the claims. It appears that Judge Dyk was correct when he stated in concurrence that:
The problem is that our decisions provide inadequate guidance as to when it is appropriate to look to the specification to narrow the claim by interpretation and when it is not appropriate to do so. Until we provide better guidance, I fear that the lower courts and litigants will remain confused.
SciMed Life Systems, Inc. v. Advanced Cardiovascular Systems, Inc., 242 F.3d 1337,1347 (Fed.Cir.2001).
However, despite the apparent contradiction, after review of the language of the ’462 patent specification, the Defendant’s position prevails. The specification explicitly states that the “resetting means” is not limited to the “reciprocal member 80.” The specification then goes onto define what else could be used in place of “reciprocal member 80:”
the reciprocal member may utilize any geometry which allows the reciprocal member 80 to be slidably disposed within the wall 84 of the housing 24 while engaged the linkage mechanism internally and providing access to the reciprocal member 80 externally.
Col. 7, Lns. 44-49. The specification does not say ‘here are some structures, but other structures would work too.’ Instead, the patentee, as is his right, specifically and deliberately broadened the scope of “resetting means” by describing the other structures that “resetting means” could take. Consequently, he is stuck with his own definition of the other structures. Therefore, the Court concludes that the specification explictly what structure is minimally required to be a “resetting means,” and it includes the three limitations identified by the Defendant.
Plaintiffs second argument is that the Doctrine of Claim Differentiation presumes that every claim has a different scope. As a result, since Claim 8 includes “slidably disposed” and Claim 1 does not, the Plaintiff asserts that “slidably disposed” cannot be read into the structure. In support, the Plaintiff cites Wenger Manufacturing, Inc. v. Coating Machinery Systems, Inc., 239 F.3d 1225 (Fed.Cir. 2001), which states,
Although the judicially created doctrine of claim differentiation cannot override the statutory requirements of § 112, ¶ 6, Laitram Corp. v. Rexnord, Inc., 939 F.2d 1533, 1538, 19 USPQ2d 1367, 1371 (Fed.Cir.1991), it does not necessarily follow that means-plus-function limitations must be interpreted without regard to other claims. Claim differentiation, while often argued to be controlling when it does not apply, is clearly applicable when there is a dispute over whether a limitation found in a dependent claim should be read into an independent claim, and that limitation is the only meaningful difference between the two claims.
Wenger Mfg., Inc. v. Coaling Machinery Systems, Inc., 239 F.3d 1225, 1233 (Fed. Cir.2001).
Despite the above language, claim differentiation does not usually apply to means-plus-function claims. Rather, “claims that are written in the form authorized by section 112 paragraph 6 are by statute limited to the structure described in the specification and equivalents of that structure.” C.R. Bard, Inc. v. MS Systems, Inc. 157 F.3d 1340, 1364 (Fed.Cir. *9191998). In the case cited by Plaintiff, Wen-ger, the Federal Circuit was quick to add that a plaintiff could not avoid the requirements of § 122, ¶ 6 by “the mere addition of a dependent claim that recites the corresponding structure disclosed in the specification.” Wenger, 239 F.3d at 1234. The Wenger court then emphasized that reference to other claims is especially appropriate where the dependent claim recites a separate and distinct function. Since Claim 8 does not have a separate and distinct function, this case is distinguishable from Wenger, and the Court will not apply the Doctrine of Claim Differentiation here. Instead, the Court will rely on the usual rule that the doctrine does not apply to means-plus-function claims.
Therefore, in conclusion, the Court adopts Defendant’s proposed construction of “resetting means” because it takes into account each of the three limitations required by the specification. Plaintiffs proposal, on the other hand, is a valiant attempt to broaden the specification’s own definition, but it is contradicted by the specificity with which the patentee defined other forms the “resetting means” could take. Thus, the “resetting means” structure is:
any geometry which allows the reciprocal member to be slidably disposed within the wall of the housing while engaging the linkage mechanism internally and providing access to the reciprocal member externally.
IY. CONCLUSION
For the reasons stated above, in the’973 patent, the Court declines to interpret the term “stop” because the parties do not disagree on its meaning, construes the “lever arm” as being “an elongated element having a pivoting end, a moment arm, and an actuating end,” and finds the term “internal” has its ordinary meaning. In the ’462 patent, the Court finds that the “resetting means” structure is “any geometry which allows the reciprocal member to be slidably disposed within the wall of the housing while engaging the linkage mechanism internally and providing access to the reciprocal member externally.”
IT IS SO ORDERED.