OPINION
I. Introduction
This case concerns the scope of the anti-dumping duty order issued by the Department of Commerce (“Commerce” or “Department”) on Certain Malleable Iron Pipe Fittings, Cast, Other Than Grooved, from the People’s Republic of China. 68 Fed.Reg. 69,376 (Dec. 12, 2003) (“Order”). Pursuant to Rule 56.2 of the United States Court of International Trade, Plaintiff Sango International L.P. (“Sango”) has moved for a judgment upon the agency record declaring that Commerce’s scope ruling holding that gas meter swivels and gas meter nuts fall within the ambit of the Order is unsupported by substantial evidence on the record and otherwise is not in accordance with the law. See Notice Final Scope Ruling (Jan. 11, 2005) (Pl.’s App. 630-44) (“Scope Ruling”). For the reasons stated below, this court denies Plaintiffs motion for judgment on the agency record.
II. Procedural History
On December 12, 2003, Commerce issued an antidumping order imposing duties on “certain malleable iron pipe fittings, cast, other than grooved fittings, from the People’s Republic of China” (“China” or “PRC”). Order, 68 Fed.Reg. 69,377. The Order described the covered products as
certain malleable iron pipe fittings, cast, other than grooved fittings, from the People’s Republic of China. The merchandise is classified under item num*1358bers 7307.19.90.30, 7307.19.90.60 and 7307.19.90.80 of the Harmonized Tariff Schedule (HTSUS). Excluded from the scope of this order are metal compression couplings, which are imported under HTSUS number 7307.19.90.80. A metal compression coupling consists of a coupling body, two gaskets, and two compression nuts. These products range in diameter from 1/2 inch to 2 inches and are carried only in galvanized finish. Although HTSUS subheadings are provided for convenience and U.S. Customs and Border Protection (CBP) purposes, the Department’s written description of the scope of this proceeding is dispositive.
Id.1 Pursuant to 19 C.F.R. § 351.225(c)(1), on July 28, 2004, Nitek Electronics, Inc., an importer of gas meter swivels and gas meter nuts, and Sango, an United States manufacturer which insulates imported gas meter swivels, applied to Commerce for a scope ruling that would exclude gas meter swivels and nuts from the Order. See Application Scope Ruling Meter Swivels & Meter Nuts (Pl.’s App. 1-12). On August 10, 2004, Defendant-Intervenors Ward Manufacturing, Inc. (“Ward”), and Anvil International, Inc. (“Anvil”),2 submitted comments to Commerce contending that gas meter swivels and nuts fall within the Order because they are “malleable iron pipe fittings which are cast and that are not grooved fittings and are not compression fittings.” Ward Resp. Application Scope Ruling (Def.’s App. Tab 1, at 1).
Commerce began a formal scope inquiry on September 13, 2004, in accordance with 19 C.F.R. § 351.225(e), as it was “unable to determine conclusively that meter swivels and meter nuts are pipe fittings and are treated as such within the industry.” Scope Inquiry Initiation (Pl.’s App. 289-90). As interested parties, Anvil and Ward respectively submitted briefs on whether meter swivels and nuts he within the scope of the Order on October 4, 2004, and October 14, 2004. On October 18, 2004, Commerce notified Ward that it had submitted these filings without the certifications mandated by 19 C.F.R. § 351.303(g), forcing the Department to reject them. The Department, however, gave Ward a one-day extension to resubmit its briefs, which Ward promptly did. See Commerce Deficiency Letter (Def.-In-tervenors’ App. Tab 4); Ward Case Br. (Oct. 19, 2004) (Def.-Intervenors’ App. Tab 5); Ward Rebuttal Br. (Oct. 19, 2004) (Def.-Intervenors’ App. Tab 5).
In its investigation, Commerce analyzed the Order, the petition, the initial investigation, determinations of the United States International Trade Commission (“ITC”), an(j the determinations of the *1359Secretary of Commerce to determine whether these sources proved dispositive as to whether gas meter swivels and nuts fall within the Order’s scope. See 19 C.F.R. § 351.225(k)(l). Commerce found these sources dispositive and issued the Scope Ruling on January 11, 2005, finding that gas meter swivels and gas meter nuts fall within the scope of the Order. See Scope Ruling at 12-14. Specifically, it determined that:
First, these products are manufactured from malleable iron using a casting process in the PRC. Second, these products are indisputably “fittings;” they are “pipe fittings” because they are parts of a piping system, they direct the flow of the gas through a piping system, and can be, although are not always, connected to other pipe fittings or pipes. Finally, they are neither grooved fittings nor compression couplings, both of which are specifically excluded.
Id. at 12. Sango then brought this action to contest the Scope Ruling.
Plaintiff Sango sets forth three contentions in its motion for judgment on the agency record. First, it maintains that it was clear error for Commerce to grant Defendant-Intervenors extensions to refile their case and rebuttal briefs after discovering that the initial submissions lacked administratively-mandated certifications. Consequently, Sango avers that these submissions should not constitute a part of the agency record. Second, Sango claims that gas meter swivels and gas meter nuts lie unambiguously outside the scope of the Order, “as evidenced by the language of the Order, the facts of the record and other administrative determinations,” rendering Commerce’s Scope Ruling unsupported by substantial evidence and otherwise not in accordance with the law. Pl.’s Mot. J. A.R. 2. Finally, Sango believes the court should deem Commerce’s Scope Ruling invalid because the Department failed to consider the so-called Diversified Products criteria3 enumerated in 19 C.F.R. § 351.225(k)(2).
III. Discussion
A. Preliminary Issues: Defendant-In-tervenors’ Submission Extension
Sango asserts that the Department erred by granting Anvil and Ward a one-day extension to re-file their case brief and rebuttal case brief, which lacked certifications required by 19 C.F.R. § 351.303(g), and that the briefs therefore should not become part of the record. See Mem. Supp. Pl.’s Mot. J. A.R. 35. Plaintiffs argument is without merit. Only with a demonstration of “substantial prejudice” can Sango challenge Commerce’s decision to provide Defendanb-Intervenors with a one-day extension to resubmit their documents. Am. Farm Lines v. Black Ball Freight Serv., 397 U.S. 532, 539, 90 S.Ct. 1288, 25 L.Ed.2d 547 (1970) (citation omitted); see 5 U.S.C. § 706 (1966) (“due account shall be taken of the rule of prejudicial error” in reviewing agency action); Intercargo Ins. Co. v. United States, 83 F.3d 391, 394-95 (Fed.Cir.1996). The Supreme Court has long upheld “the general principle that (i)t [sic] is always within the discretion of ... an administrative agency to relax or modify its procedural rules adopted for the orderly transaction of business before it when in a given case the ends of justice require it.” Am. Farm Lines, 397 U.S. at 539, 90 S.Ct. 1288 (quo*1360tations & citation omitted). Further, Commerce’s own regulations state that “[u]nless expressly precluded by statute, the Secretary may, for good cause, extend any time limit established” within the anti-dumping and countervailing duties regulations. 19 C.F.R. § 351.302(b).4 Plaintiff makes no assertion that substantial prejudice to its case arose from the Department’s decision. Therefore, its claim must fail.
B. The Scope Ruling
1. Standard of Review
In reviewing a Commerce anti-dumping order scope determination, this court upholds the Department’s conclusion unless the court finds it “unsupported by substantial evidence or otherwise not in accordance with law.” Steel Auth. of India, Ltd. v. United States, 25 CIT 482, 485, 149 F.Supp.2d. 921, 926 (2001) (quoting 19 U.S.C. § 1516a(b)(l)(B) (1994)) (quotations omitted); see 19 U.S.C. § 1516a(b)(l)(B)(i) (1996); Nippon Steel Corp., NKK v. United States, 219 F.3d 1348, 1355 (Fed.Cir.2000). In this context, “substantial evidence” denotes “such relevant evidence as a reasonable mind might accept as adequate to support a conclusion.” Consolo v. Fed. Mar. Comm’n, 383 U.S. 607, 619-20, 86 S.Ct. 1018, 16 L.Ed.2d 131 (1966) (quoting Consol. Edison Co. of N.Y. v. NLRB, 305 U.S. 197, 229, 59 S.Ct. 206, 83 L.Ed. 126 (1938)) (quotations omitted). Crucially, “the possibility of drawing two inconsistent conclusions from the evidence does not prevent an administrative agency’s finding from being supported by substantial evidence.” Id. at 620, 86 S.Ct. 1018 (citation omitted). Similarly, a scope determination is not in accordance with law “if it changes the scope of an order or interprets an order in a manner contrary to the order’s terms.” Allegheny Bradford Corp. v. United States, 28 CIT -, -, 342 F.Supp.2d 1172, 1183 (2004). “Scope orders may be interpreted as including subject merchandise only if they contain language that specifically includes the subject merchandise or may be reasonably interpreted to include it.” Id. at 1184 n. 6 (quoting Duferco Steel, Inc. v. United States, 296 F.3d 1087, 1089 (Fed.Cir.2002)) (quotations omitted).
The first step in evaluating whether Commerce properly placed gas meter swivels and nuts within the scope of the Order requires the court to examine “the antidumping petition, the factual findings and legal conclusions adduced from the administrative investigations, and the preliminary order.” Duferco Steel, 296 F.3d at 1097 (quoting Smith Corona Corp. v. United States, 915 F.2d 683, 685 (Fed.Cir.1990)) (quotations omitted); see Tak Fat Trading Co. v. United States, 396 F.3d 1378, 1382 (Fed.Cir.2005); 19 C.F.R. § 351.225(k). Among these sources, the language of the order receives the greatest weight. See Tak Fat Trading, 396 F.3d at 1382; Duferco Steel, 296 F.3d at 1097. If these materials do not prove dispositive, the court then turns to the Diversified Products criteria outlined in 19 C.F.R. § 351.225(k)(2) to make its determination. See Tak Fat Trading, 396 F.3d at 1382; Allegheny Bradford, 342 F.Supp.2d at 1183; 19 C.F.R. § 351.225(k).
2. The 19 C.F.R. § 351.225(k)(l) Factors
As noted earlier, Commerce’s Order defined the Order’s scope as encompassing
certain malleable iron pipe fittings, cast, other than grooved fittings, from the People’s Republic of China. The merchandise is classified under item num*1361bers 7307.19.90.30, 7307.19.90.60 and 7307.19.90.80 of the Harmonized Tariff Schedule (HTSUS). Excluded from the scope of this order are metal compression couplings, which are imported under HTSUS number 7307.19.90.80. A metal compression coupling consists of a coupling body, two gaskets, and two compression nuts. These products range in diameter from 1/2 inch to 2 inches and are carried only in galvanized finish.
Order, 68 Fed.Reg. at 69,376. Likewise, throughout the antidumping proceedings, Commerce used almost identical language to describe the scope. See supra n. 1. The antidumping petition and related ITC documents employed the same terminology as well. See Anvil & Ward, Malleable Iron Pipe Fittings from China: Antidumping Duty Petition 4 (Oct. 30, 2002) (describing requested investigatory scope as in Order, though lacking metal compression coupling exception) (“Petition”); Malleable Iron Pipe Fittings from China, ITC Publ’n No. 3649, Investigation No. 731-TA-1021 (Final), at 5 (Dec.2003) (“ITC, 3649”).
The ITC publications and administrative documents regarding the antidumping investigation flesh out the meaning of the Order’s text. According to the ITC, Malleable Iron Pipe Fittings from China: Determination and Views of the Commission, ITC Publ’n No. 3568, Investigation No. 731-TA-102I (Preliminary), at 5 (Dec. 2002) (footnote omitted) (“ITC, 3568”); see ITC, 3649 at 3; see also Petition at 5 (“Malleable pipe fittings are normally ... attached to pipe by screwing.”) (emphasis added); Anvil & Ward, Amendment to the Petition for the Imposition of Antidumping Duties: Malleable Iron Pipe Fittings from China, at 4 (Nov. 12, 2002) (same) (“Pet.Am”). Further, pipe fittings are threaded, “normally” to the American National Standards Institute (ANSI) Bl.20.1 specification. Pet. Am. at 3; Petition at 4; see ITC, 3568 at 6.5
[p]ipe fittings generally are used for connecting the bores of two or more pipes or tubes, connecting a pipe to some other apparatus, changing the direction of fluid flow, or closing the pipe. The material from which MCIPF [malleable cast iron pipe fittings] are made, cast iron, is a general term for alloys composed primarily of iron, carbon (greater than two percent) and silicon.
3. Plaintiffs Argument
Sango believes that “the discussion of the class or kind of merchandise contained in the Order unambiguously excludes” gas meter swivels and gas meter nuts from this rubric and that therefore “the Department’s Scope Ruling to the contrary is not supported by substantial evidence nor is it otherwise in accordance with the law.” Mem. Supp. Pl.’s Mot. J. A.R. 2. It bases this claim on the specialized nature of the products. A meter swivel can connect only with a gas meter on one end and a pipe fitting on the other,6 while a “pipe ‘fitting’ is almost always physically threaded onto one end of a length of pipe and is the means whereby the pipe is joined to (i) another length of pipe; (ii) a gas meter bar or (iii) a gas meter swivel.” Mem. Supp. PL’s Mot. J. A.R. 9 (emphasis added). In essence, because neither gas meter swivels nor nuts can attach to a length of pipe,7 *1362they cannot qualify as pipe fittings. See Mem. Supp. Pl.’s Mot. J. A.R. 10, 16, 19; Pl.’s Reply 2, 4. In a parallel line of reasoning, Plaintiff claims that gas meters and swivels constitute different articles of commerce than pipe fittings and, therefore, cannot fall within the scope of the Order. See Mem. Supp. Pl.’s Mot. J. A.R. 9.
4. Analysis
Despite Sango’s protests to the contrary, gas meter nuts and swivels possess the characteristics of pipe fittings outlined in the Order and thus fall within its scope. As Plaintiff concedes, the products are cast, made of malleable iron, manufactured in the PRC, and do not fall within the express exceptions within the Order. See Pl.’s App. 610. Likewise, the swivel-nut unit8 connects to a gas meter and links this apparatus to a piping system via a less specialized pipe fitting to manipulate the flow of the gas. See Pl.’s Br. 10; see, e.g., Pl.’s App. 369, 374. Although the swivel may not directly touch a pipe, there is nothing in the record of this case to require that pipe fittings must directly connect to a pipe to be considered pipe fittings. Further, swivels are threaded according to the ANSI Bl.20.1 specification characteristic of all pipe fittings. Even Sango’s brief notes that pipe fittings “almost always” connect to a pipe on one end; sometimes they do not. Mem. Supp. PL’s Mot. J. A.R. 9. Finally, Sango’s contention that gas meters and swivels are separate articles of commerce from pipe fittings fails since the Order does not address this issue when outlining its scope. Together, these facts, read in light of the Order’s language, reasonably provide adequate evidence to place gas meter swivels and gas meter nuts within the scope of the Order.9 Consequently, this court must uphold the Department of Commerce’s Scope Ruling as supported by substantial evidence and in accordance with law.10
IY. Conclusion
For the reasons stated above, Sango’s motion for judgment on the agency record is DENIED.